A COMPLETE UNIVERSAL CHECKWEIGH & SORTING SYSTEM

COMPOSED OF THE FOLLOWING:

•  AWSI-204 ADVANCE Weigh Cell

-Full Scale Range of 1000 grams
-Accuracy of ±0.2 gram
-Repeatability of ±0.01%
-30 to 45 ppm capability

•  Scale Mounted Gated Hopper

-Holds part during weighment.
-Releases part to sorting after weighment.
-Totally counter-weighted to add nothing to the weighment.

•  2 Class Passive Sorting Gate

-Safe, clean sorting of parts
-Few mechanical parts to maintain
-Requires 30 - 100 psi DRY air

•  AWSI-v700-SC Setpoint Controller

-Weighs and Classifies Part.
-Determines condition, correct or incorrect.
-Actuates Scale hopper release.
-Actuates sorting gate.
-Menu driven calibration.
-Statistical Reporting Capability

The AWSI-v700-SC-2CW-204-H2 Two Class Checkweigh Gated Sorting System is fast becoming the industry standard where accuracy and trouble free operation are needed. This is truly a universal check-weigher that can be used to check-weigh anything under 1000 grams. From packaged soup to packets of hardware, (nuts). The check weigh system will deliver years of trouble free service in any application.

The operation of the system is simple and straightforward. The parts/products are best delivered to the weighing system using a conveyor. The uniformly spaced product drops one at a time onto the scale where it is caught by the on-scale hopper and weighed. The AWSI-v700-SC Setpoint Controller determines whether or not the part is outside the pre-selected acceptable limits, where it is released from the scale via the scale hopper and it is sorted to either the "good" or "bad" side of the sorting gate, where it then drops into the customer provided containers.

Depending upon the size of the part and the closeness of the setpoints, between 30 to 45 parts per minute are possible with the high level of accuracy for which ADVANCE WEIGHT SYSTEMS, INC. is famous.

The AWSI-v700-SC Setpoint Controller not only operates the various components, but also provides, in a single unit, statistical gathering & reporting and RS-232 or RS-485 serial interface to the customer's production control equipment or computer. The unit can be set to control the process with feedback to the process equipment.

Available in several mounting configurations, these systems will fit into many manufacturing environments.